4 No. and 5 No. Hopper Mesh: 0.80 mm and 1 mm
4 No. is 0.80 mm. 5 No. is 1 mm. Both are fine hopper and mill screens, one step up from 3 No.
Read more
Guides & tips
Blog — Mesh Guides & Tips
Practical guides to help you choose the right wire mesh, perforated sheet or safety spike for your project in Noida and Delhi NCR.
3 No. Hopper Mesh: 0.60 mm Micro Hole
3 No. is the smallest hole on the Garg mill chart, 0.60 mm. Mills use it as micro hole hopper mesh and as a fine rice or spice screen.
Read moreMicro Hole Perforated Sheet: The Hole Number Chart
Micro hole sheet is the fine end of the mill chart: 3 No. at 0.60 mm through 6½ No. at 1.5 mm. Larger numbers are still mill jali.
Read moreWoven Fine Mesh vs Hopper Mesh: Channi or Mill Jali
Atta channi is woven cloth by mesh × SWG. Hopper mesh and chakki jali are punched sheet by hole number. They are not interchangeable.
Read moreHow to Order Fine Mesh: Count, Metal and Roll Width
A fine-mesh order needs three lines: mesh × SWG, the metal, and the roll width. A sample of the old cloth is better than a guess.
Read moreFine Powder and Filter Cloth: 80×42, 100×44 and 150×46
The fine end of the cloth chart is 80×42 for powder, 100×44 for fine filters, and 150×46 for extra-fine powder.
Read moreMaida, Besan and Fine Spice Mesh: 60×38
60×38 is the maida, besan and fine spice cloth. It is finer than atta channi and coarser than the powder filter counts.
Read moreAtta Channi Mesh: 40×36 SS 304, Brass and Copper
Atta channi at Garg is woven 40×36 cloth. It is not the punched sheet inside an atta chakki.
Read moreFine Mesh 20×30 and 30×32: Coarse and Medium Sifter Cloth
20×30 is the coarse vibro and spice pre-screen. 30×32 is the medium sifter and filter cloth. Both are mesh × SWG.
Read more