Fine mesh is ordered in three lines. Miss one and the roll comes back wrong. Garg Industrial Mesh, Sector 9, asks for the count, the metal and the width.
The three lines
- Count. Mesh × SWG: 20×30, 30×32, 40×36, 60×38, 80×42, 100×44 or 150×46.
- Metal. SS 304, brass, copper, GI or MS.
- Width. 3 ft or 4 ft rolls. Other widths are cut to the frame.
What a sample does
A palm-sized piece of the worn cloth shows the count and the metal together. Photo of a whole roll is harder to read. If the frame is stamped, send that stamp as well.
What not to send
Do not send a hole number such as 3 No. That is hopper mesh, punched sheet. Do not send 14×14. That is door machhar. Do not ask for a millimetre on 36 SWG or finer from the heavy gauge chart. That wire is confirmed on the quote.
Why place the order here
All seven counts and the three metals buyers name most often are cut at G-25, G Block, Sector 9, Noida. The quote follows the spec. Call or WhatsApp 9910238277.