Acoustic Perforated GI Sheet: 22, 24 and 26 Gauge
The acoustic liner is GI only, in 22, 24 or 26 gauge, with 3 mm or 5 mm holes. Tissue and glass wool are a separate pack.
Read more
Guides & tips
Blog — Mesh Guides & Tips
Practical guides to help you choose the right wire mesh, perforated sheet or safety spike for your project in Noida and Delhi NCR.
Corrugated Perforated Sheet: 4×8, 4×10, 4×12 and a 1 m Finish
Usual corrugated perforated sheets are 4×8, 4×10 and 4×12 ft. The finished width is 1 metre. Length can be one of those three or a length you name.
Read moreWhy Noida Mills Order Fine Mesh and Hopper Mesh from Garg
One counter in Sector 9 cuts woven SS 304, brass and copper cloth and the numbered mill sheet, and keeps the two orders apart.
Read moreSS 304, Brass or Copper Mill Jali
Hopper mesh and mill jali use the same hole numbers in SS 304, brass and copper. The metal follows the screen already in the mill.
Read moreHow Mills Order a Micro Hole Sheet
A micro hole order is the hole number, the metal, the thickness and the plate size. The old sheet is the pattern.
Read moreDal Mill Jali and Spice Mill Screens: Which Number
Dal mills name 11 No. at 4 mm for the mill screen. Spice lines use a micro hole sheet in the mill and a woven cloth on the sifter.
Read moreAtta Chakki Jali vs Atta Channi
Atta chakki jali is punched sheet by hole number. Atta channi is woven 40×36 cloth. A chakki plant often needs both.
Read moreRice Mill Jali: Which Hole Number Goes Where
A rice mill does not run one hole number. Fine screens, chambers and cleaners each keep the number already in that machine.
Read more5½, 6 and 6½ No. Fine Hole Mill Jali
5½ No. is 1.2 mm, 6 No. is 1.4 mm and 6½ No. is 1.5 mm. This is the last of the micro hole range.
Read more