Mills in Noida, Greater Noida and the rest of Delhi NCR replace two screens all year: woven sifter cloth and punched mill sheet. Garg Industrial Mesh at Sector 9 is set up to cut both without mixing the names.
What is actually on the counter
- Fine mesh in SS 304, brass, copper, GI and MS. Counts are 20×30, 30×32, 40×36, 60×38, 80×42, 100×44 and 150×46. Rolls are 3 ft and 4 ft.
- Hopper mesh and mill jali in SS 304, brass and copper. Holes run from 3 No. at 0.60 mm to 15 No. at 8 mm. The micro end stops at 6½ No., 1.5 mm.
- Door mesh, if that is what you came for, is 14×14, not a channi count.
Why the order stays clean
The quote asks for a count or a hole number, a metal, and a size. A 40×36 cloth is not priced or cut as a 3 No. sheet. Thickness on the punched sheet and wire millimetres on the fine SWG counts are confirmed on the RFQ, not invented on the page. There is no printed rate list for these two products.
Where to come
G-25, G Block, Sector 9, Noida 201301. Delivery runs across Noida, Greater Noida, Delhi, Ghaziabad, Faridabad and Gurugram. Call or WhatsApp 9910238277. Bring the worn piece if the number has rubbed off.