Dal and spice plants order two families of screen. Garg Industrial Mesh cuts both in Sector 9.
Dal mill jali
11 No. is 4 mm, and that is the rice mill and dal mill screen on this chart. Coarser graders sit at 12 No. (5 mm) and above. A dal line that also has a fine cleaner may use 6½ No. or 10 No. The sheet you remove is the number to reorder. Do not put 11 No. into a housing that was 4 No.
Spice mill screen
The punched spice screen uses the same hole chart. Fine spice screens are the micro end: 3 No. at 0.60 mm up through 6½ No. at 1.5 mm. The metal is SS 304, or brass when the mill already runs brass.
Spice sifter cloth
Powder that is sifted after the mill is woven cloth, not this sheet. Fine spice cloth is often 60×38. Extra-fine powder moves to 80×42 and above. Say whether the piece came out of the mill housing or off the sifter frame.
G-25, G Block, Sector 9, Noida. Call or WhatsApp 9910238277.