Rice mill jali is punched sheet. Garg Industrial Mesh does not put one hole number on every stage of a rice plant. Each machine keeps the hole it was built with.
Numbers rice mills actually name
| Stage | Numbers on the Garg chart |
|---|---|
| Fine rice or spice screen | 3 No., 0.60 mm |
| Fine hole rice mill and chamber | 5½ No., 1.2 mm |
| Fine hopper and cleaner | 6½ No., 1.5 mm |
| Chamber screen | 7½ No., 2 mm |
| Chamber and grader | 8½ No., 2.5 mm |
| Hopper and cleaner | 10 No., 3 mm |
| Rice mill and dal mill screen | 11 No., 4 mm |
| Grader and cleaner | 12 No., 5 mm |
| Coarser mill and cleaner | 13 No. to 15 No., 6 mm to 8 mm |
How the mill does the change
The fitter takes the sheet off that stage only. Fine hopper, chamber and cleaner are not the same hole. The new sheet is cut to the old outline, in SS 304, brass or copper, at the same number. If the number is lost, the old sheet is the sample. Thickness is confirmed with the order.
Ordering “rice mill jali” without a number produces the wrong stage. Name the number, or send the piece.
Garg Industrial Mesh, G-25, G Block, Sector 9, Noida. Call or WhatsApp 9910238277.