Past the atta and maida counts, Garg fine mesh continues to 80×42, 100×44 and 150×46. These are still mesh × SWG, in SS 304, brass and copper.
What each fine count is for
| Count | Use |
|---|---|
| 80×42 | Fine powder grading |
| 100×44 | Fine filter and powder cloth |
| 150×46 | Extra-fine powder and filter cloth |
Filter workshops use this end when the particle is smaller than maida or besan. A spice powder that must be held tighter than 60×38 moves up this list. Match the old cloth. Do not jump to 150×46 because it sounds finer if the frame was built for 80×42. The finer cloth blinds sooner and cuts the flow.
Wire size
The SWG on these counts is finer than the structural gauge chart, so the wire millimetre is confirmed on the RFQ. Do not convert 42 SWG or 46 SWG from the heavy-wire chart.
Where to buy it
Garg Industrial Mesh stocks the full run, 20×30 through 150×46, in one place. G-25, G Block, Sector 9, Noida. Call or WhatsApp 9910238277.