Step 3 of 3
5 No. — pick the metal, then quote. Specs and buying notes are below.
Material types
5 No. is a 1 mm round-hole perforated sheet. Mills call it hopper mesh, hopper jali, rice mill jali and number jali. Fine mill screen and hopper mesh. Metals: SS 304, brass and copper. Also used as atta chakki jali, dal mill jali and spice mill screen. Plate size and thickness are confirmed on the RFQ. From Sector 9, Noida.
Ordered by hole number. Flat perforated sheet for mill hoppers and chambers, not woven channi cloth.
SS 304 is the metal rice mills and atta plants usually name for hopper mesh and chamber jali. Hole numbers run from 3 No. (0.60 mm) to 15 No.
Confirm hole ≥ thickness, name grade + temper, give sheet size and blank edge (0–100 mm custom), and say the end use in one line. Incomplete RFQs become clarification chains.
Notes for this product — skim what you need, then send the RFQ.
Garg chart: number on the left, hole size on the right. Round holes in SS 304, brass and copper. 3 No. to 6½ No. (0.60 mm to 1.5 mm) are the micro hole sheets. Thickness and plate size are confirmed on the RFQ.
Replacement screens are bought by rice mills, atta chakki plants, dal mills and spice grinders. They ask for hopper mesh, rice mill jali or a hole number. Woven sifter cloth is Fine Mesh.
Hopper mesh, hopper jali, rice mill screen and number jali. The hole is 1 mm on the Garg chart. Holes at 1.5 mm and below are the micro hole / fine hole perforated sheets.
Fine mill screen and hopper mesh. The same sheet is fitted in rice mill hoppers, atta chakki chambers, dal mills and spice mills. Send the hole number, or a sample, plus metal and thickness.
SS 304 is the usual food and wet-screen metal. Brass and copper are made to the same hole number when the mill already runs that metal.
No. Atta channi and filter cloth are Fine Mesh (mesh × SWG). This is punched sheet.
Yes — from G-25, Sector 9, Noida across Noida, Greater Noida, Delhi, Ghaziabad, Faridabad and Gurugram. Call or WhatsApp 9910238277.
